Technical Sheet for ASI 600

Type ............................................................................................................One-part, gasket maker

Appearance ................................................................................................... Smooth, non-slump red paste

Specific Gravity ...............................................................................................1.18

Extrusion Rate .................................................................................................250g/min (1/8" bead 90 psi)

Application Temperature Range ............................................................................-18°C to +50°C (0°F to +120°F)

Cure Method ...................................................................................................Acetoxy, moisture cure

Skin Over Time.................................................................................................10 minutes

Cure Time ......................................................................................................24 hours (1/4" bead)

Slump/Sag....................................................................................................... Nil

at 25°C (77°F) and 50% R.H. for 7 days (1/4" bead)

Durometer Hardness (Shore A) (ASTM D 2240)........................................................................................................... 33

Tensile Strength (ASTM D 412) ..................................................................................................................350 psi

Elongation at Break (ASTM D 412) ..................................................................................................................400%

Tear Resistance (ASTM D 624, Die B) ....................................................................50 ppi (2.7kN/m)

Temperature Range After Cure Short Periods .......................................-57°C to 310°C (-70°F to 600°F)

Temperature Range After Cure Continuous Operation .................... -57°C to 260°C (-70°F to 500°F)

Shrink Factor.............................................................................................. Nil

ASI 600, when stored in original unopened container at or below 32°C (90°F) has a shelf life of 12 months from date of shipment.

ASI 600 is supplied in (10.2 fl. oz.) caulking cartridges, (40 lb.) pails and (495 lb.) drums.

ASI 600 warrants only that its products will meet its specifications. ASI shall in no event be liable for incidental or consequential damages. Except as expressly stipulated, ASI’s liability, expressed or implied, is limited to the stated selling price of any defective goods.

Back to Top